NH brackets are orientated horizontally
an Nvelope NH brace bar can be inserted into the bracket pocket in the underside of the bracket to create a horizontal NH bracket.
NH1 is the NVELOPE back frame – horizontally orientated system.
NVELOPE horizontal ‘L’ is fixed into the support brackets, fixed through a series of fixed and flexible points.
NVELOPE flexible point brackets absorb wind loading and allow for expansion and contraction.
NVELOPE fixed point brackets absorb dead loads.
manufacturer: NVELOPE rainscreen systems ltd
product reference: NVELOPE NH1
type:
[120]. – adjustment from 122 mm min to 162 mm max – single – 6.5 mm holes / 11.0 mm hole
[150]. – adjustment from 152 mm min to 192 mm max – single – 6.5 mm holes / 11.0 mm hole
[180]. – adjustment from 182 mm min to 222 mm max – single – 6.5 mm holes / 11.0 mm hole
[210]. – adjustment from 212 mm min to 252 mm max – single – 6.5 mm holes / 11.0 mm hole
[240]. – adjustment from 242 mm min to 282 mm max – single – 6.5 mm holes / 11.0 mm hole
[270]. – adjustment from 272 mm min to 312 mm max – single – 6.5 mm holes / 11.0 mm hole
[300]. – adjustment from 302 mm min to 342 mm max – single – 6.5 mm holes / 11.0 mm hole
* 6.5 mm holes (suitable for steel and / or timber substrates) / 11.0 mm holes (suitable for block / concrete substrates)
if isolator is not required reduce dimensions by 5mm
can be used to support vertical elements – allowing for varied façade design options.
