NVELOPE Rainscreen Cladding Systems  

Designed for architects. Built for installers
Realisation of architectural expression

Vertical Rainscreen Cladding Systems

NV10

NV10 is the NVELOPE system is suitable for off-site / factory fixed application of face fixed or concealed fixed plank panelling.

NV10 is the NVELOPE system is suitable for off-site / factory fixed application of face fixed or concealed fixed plank panelling. As with all of the NVELOPE systems NV10 begins with NV1; 60 X 40 L profile running vertically, fixed into the helping hand bracket with an SR2 screw. We have helping hand brackets that are available for any substrate. The NV3 rail is then secured horizontally to the L profile, ready to receive the NV3 hangers.


Video

View 1

View 2

View 3

View 4

View 5

View 6

Features

Façade panels are fixed to the NV10 vertical rail (standard 3m lengths, can be cut to size before delivery or on site), using either of the following three methods; face fixed with a rivet, structurally bonded using Sika adhesive and tape or a secret mechanical fixing using a Keil anchor through the NV10 vertical rail. As the panels are secured to a hanging system separately from the support frame; this system lends itself to off-site or factory application. This is beneficial if using the Sika adhesive as this form of application is weather dependant.

For secret mechanical fixing, access holes need to be drilled into the back of the NV10 rail for the Keil anchors.

NV3 hangers are secured to the back of the vertical NV10 rail, this can be done off-site. The NV3 hangers, hang onto the horizontal NV3 rail on-site. The range of adjustment within the helping hand bracket allows for level and adjustment between the substrate and the support system; while the adjustment screw on the top hangers are designed to allows for final alignment and adjustment.

The NV10 system can also be used to create sizeable (to suit site conditions) façade panels from plank format cladding. Individual planks are fitted in panel form and any width of plank can be catered for. The number of anchors and hangers are adjusted to suit wind speeds and weight of the built up panel.

The NV10 system is composed of standard off the shelf components resulting in rapid delivery and these components are quick and easy to install.

NVELOPE 'T' and 'L' profiles are fixed using NVELOPE support brackets, fixed through a series of fixed and flexible points.

NVELOPE bracket spacing is determined by cladding options such as the dimensions and weight of the façade cladding, local wind loads.

NVELOPE fixed point brackets absorb both vertical dead loads.

NVELOPE flexible point brackets absorb both wind loading and allow for expansion and contraction.

Download NV10 technical spec here

Download NBS Plus Product Entry

Download
Product Entry

Download NBS BIM Product Entry

Download
Product Entry

Email our Tech Team

Email our
Tech Team

View our BBA Certification

View our BBA
Certification

All products are made in the UK

All products are
made in the UK

Nvelope NV10

NV10

NV10 = NV1 + NV3 Components (NV2 components)

Select NV1 components (bracket and rail) - then - select NV3 components rail and hanger - NV10 vertical rail - (NV2 Sika componants if secret adhesive fixing specified. NV3 fixings if secret mechanical fixing specified. Rivets for face fixed panels.)

Component

Reference

Detail

NV10 for face fixed or concealed fixed plank panelling

NV10 Vertical Rail

02/NV10-VR-3000

3 metre lengths

Main NV3 horizontal rail

CP-NV3-3000

3000 = 3 metre length (can be 6 m)

Adjustable Hanger

NV3-PTS-ADJF

 

Fixed hangers

NV3-PTS-STAT

 

L Profile 60 X 40 X 2.2mm

L60-40-2.2-3000

3m, 3.6m, 4.85m & 6m lengths available

Fixings

SR2 4.2 x 16

4.2-16

Rail to bracket

SR2 4.8 x 19

4.2-19

Main horizontal rail to 50x50 2.2 L rail

Hanger securing screw

JT3-3-5.5X50S16

5.5mm x 50mm securing screw

Keil anchors

On request

Thin stone / ceramic / fibre cement

Sika

Adhesive - 600cc 'sausage'

STS-600

600cc = 13 metre coverage

Adhesive - 310cc 'cartridge'

STC-310

310cc = 6 metre coverage

Tape (33m)

STT-33M

33m coverage33m coverage

Activator 205

STA-205-1LTR

285mm coverage (50mm wide)

Primer 1ltr

STPP-1LTR

125m coverage (50mm wide)

Range of Adjustment (Single / Double - 6.5mm / 11mm)

Size (mm)

Min (mm)

Max (mm)

40

93

113

60

108

148

90

138

178

120

168

208

150

198

238

180

228

268

210

258

298

240

288

328

270

318

358

300

348

388

6.5mm holes (suitable for steel and / or timber substrates) / 11mm holes (suitable for block / concrete substrates) includes NV3 rail, hanger and NV10 vertical rail 46mm). NVELOPE isolators: included as standard - if isolator not required reduce dimensions by 5mm

Profiles

(L) 60 x 40mm

+44 (0) 1707 333 396

© NVELOPE 2017 — NVELOPE is an NCASE Company.
NVELOPE Rainscreen Systems Ltd. Unit 10 Blenheim Court, Brownfields, Welwyn Garden City, Herts AL7 1AD
t: +44 (0) 1707 333 396 e: info@nvelope.com

NVELOPE Partner Logo Bl ock

This website uses cookies. By continuing to browse nvelope.com you are agreeing to this use of cookies. Find out more: Cookies.
NVELOPE reserve the right to alter technical specifications — Always check with NVELOPE Rainscreen Systems Ltd.