NV5(ts300) is the NVELOPE system for secret fix applications – vertical cladding applications (trespa meteon HPL only).

the panels are supported at the bottom by the horizontal NVELOPE NV5(ts300) channel profile which provides restraint to panel tops.

vertical joints can be open, baffled or formed by half laps with appropriately designed panel edges providing a concealed fixing.

individual panels can be removed for maintenance or replacement.

NVELOPE ‘T’ and ‘L’ profiles are fixed using NVELOPE support brackets, fixed through a series of fixed and flexible points.

NVELOPE flexible point brackets absorb wind loading and allow for expansion and contraction.

NVELOPE fixed point brackets absorb both vertical dead loads.

NVELOPE bracket spacing is determined by cladding options such as the dimensions and weight of the façade cladding, local wind loads.

NV5(ts300) is suitable for secret fix cladding applications – trespa meteon HPL only.

manufacturer: NVELOPE Rainscreen Systems Ltd

product reference: NVELOPE NV5

type:

[40]. - adjustment from 42 mm min to 62 mm max – single / double - 6.5 mm holes / 11.0 mm holes*

[60]. - adjustment from 62 mm min to 134 mm max – single / double - 6.5 mm holes / 11.0 mm holes*

[90]. - adjustment from 92 mm min to 164 mm max – single / double - 6.5 mm holes / 11.0 mm holes*

[120]. - adjustment from 122 mm min to 194 mm max – single / double - 6.5 mm holes / 11.0 mm holes*

[150]. - adjustment from 152 mm min to 224 mm max – single / double - 6.5 mm holes / 11.0 mm holes*

[180]. - adjustment from 182 mm min to 254 mm max – single / double - 6.5 mm holes / 11.0 mm holes*

[210]. - adjustment from 212 mm min to 284 mm max – single / double - 6.5 mm holes / 11.0 mm holes*

[240]. - adjustment from 242 mm min to 314 mm max – single / double - 6.5 mm holes / 11.0 mm holes*

[270]. - adjustment from 272 mm min to 344 mm max – single / double - 6.5 mm holes / 11.0 mm holes*

[300]. - adjustment from 302 mm min to 374 mm max – single / double - 6.5 mm holes / 11.0 mm holes*

* 6.5 mm holes (suitable for steel and / or timber substrates) / 11.0 mm holes (suitable for block / concrete substrates)
* includes NVELOPE horizontal NV5 (ts300 rail)

if isolator is not required reduce dimensions by 5mm

profiles:

[L]. 60 x 40 mm

[T]. 40 x 100 / 60 x 80 / 60 x 120 / 60 x 140 mm

NV5(ts300) horizontal rail and cleat

NVELOPE isolators: included as standard